Μεταλλικά αγκύρια

Βύσματα MULTI-MONTI

Raumer Climbing

Raumer Βίδα Heco Multi Monti Screw hexagon 10mm 6X50mm

RA-287
eshop_products_5409_photo.jpg
eshop_products_5409_photo.jpg
Βίδα Heco Multi Monti 10mm 6X50mm
0,75 €
 
Επικοινωνήστε για διαθεσιμότητα

Περιγραφή

This screw is recommended for cave chimney or aid climbing anchors.

The battery life of the hand drill is significantly extended as the holes must only be 6mm wide and 50mm deep.

They are more than strong enough if care is taken to alternate these screws with a safety screw of 7.5mm diameter (such as art. 289) in critical areas.

They are outstanding value for money and can be reused multiple times during an ascent.

To screw, use a 10mm hex key.

MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.

It is an innovative self-threading screw system and is highly resistant and practical. The first part of the Multi-Monti thread is characterised by thread serration / teeth.

When screwed, the anchor cuts into the material and creates the space for the rest of the screw.

Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage.

The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.

This procedure should not be employed more than three times on rock and only once on granite.

The HECO-MULTI-MONTI system is very simple to install:
1) Drill into the supporting material (rock, concrete, solid bricks) with an appropriately sized bit (see table).
2) Clean the drill hole.
3) Screw in the anchor, fixing it to the chosen plate.

HECO-MULTI-MONTI was the first screw anchor to receive the highest level of the European Technical Approval ETA:
Option 1 for use on cracked and uncracked concrete.

HECO-MULTI-MONTI is also the only screw anchor with such distinguished and varied approvals:
- European Technical Approval ETA -05/0010 Option 1, applied to MMS-7.5; MMS-10; MMS-12; MMS-14 and MMS-16 in galvanised or Delta Protekt-coated steel.
- European Technical Approval ETA -05/0011 Option 1, applied to MMS-7.5; MMS-10 and MMS-12 in stainless steel;

HECO-MULTI-MONTI is also the proud holder of the prestigious Zulassung certification awarded by the German Institute for Construction Technology, valid for compressed or cracked concrete.

HECO-MULTI-MONTI has also been awarded a F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks.

ART.287
L = 50 mm
Weight: 9,3 gr

Προδιαγραφές

HECO-MULTI-MONTI was the first screw anchor to receive the highest level of the European Technical Approval ETA:
Option 1 for use on cracked and uncracked concrete.

HECO-MULTI-MONTI is also the only screw anchor with such distinguished and varied approvals:
- European Technical Approval ETA -05/0010 Option 1, applied to MMS-7.5; MMS-10; MMS-12; MMS-14 and MMS-16 in galvanised or Delta Protekt-coated steel.
- European Technical Approval ETA -05/0011 Option 1, applied to MMS-7.5; MMS-10 and MMS-12 in stainless steel;

HECO-MULTI-MONTI is also the proud holder of the prestigious Zulassung certification awarded by the German Institute for Construction Technology, valid for compressed or cracked concrete.

HECO-MULTI-MONTI has also been awarded a F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks.

Weight : 9,3 gr