Ropes

Rope Protectors

Beal

Magnetic Protector

BL-BPRM
eshop_products_2201_photo.jpg
eshop_products_2201_photo.jpg
Rope protector reinforced on both sides by a tape for better abrasion resistance.
€84.55
€93.94  10% Discount
Contact for availability

Description

Rope protector reinforced on both sides by a tape for better abrasion resistance.

Installation facilitated by a magnetic closure.

STRONGS POINTS
- Increased abrasion resistance.
- Easy to close thanks to its magnets.
- May be independently positioned on metallic surfaces.


USE
This product is designed to provide basic protection against light abrasion for the section of rope it is fitted to.
Avoid all contact with sharp or abrasive edges whenever possible.
Ensure that the Protector is the correct length and covers the section of the rope requiring protection. If necessary use multiple Protectors.
The different components of the security system (harness, karabiners, pulleys…) must conform to the appropriate standards and be used with a full understanding of their usage and limitations in personal fall protection system.
The compatibility of this product with the other elements in the security system must be verified.
It is recommended that this equipment is allocated to one competent user during the lifetime of the product.


PRECAUTIONS
Always inspect the rope, Protector and working edge before fitting. Confirm the protection is adequate for the task.
Once installed, check that the Protector is the right size. Velcro or magnets have to be fully engaged.
During use check that the Protector is correctly fitted, still in position and working effectively.
The Protector is made of PVC
The temperature in use or in storage must not exceed 80°C. The melting temperature of PVC is 180 °C. Note: the magnets used to close and secure the Magnetic Protector will continue to function at temperatures up to the point where the Protector material is destroyed.
Before and during use, the possibility of rescue in case of difficulty must be considered and adequate preparations made..

CARE AND MAINTENANCE
Eliminate avoidable exposure to UV. Store and transport it in the shade, away from humidity and heat sources. For transporting, bear the same considerations in mind.
The Protector must not be allowed to contact chemical agents, particularly acids which may destroy the fibers without visible evidence.
If it gets dirty, wash in cold, clean water, if necessary using a cleaning
agent suitable for delicate fabrics, with a soft synthetic fibre brush. Disinfect only using materials that have no effect on the synthetic materials used.
If the Protector has been soaked, either in use or by washing, leave to dry in a shaded place, away from any heat source.
Before and after each use, check the state of the Protector.
Inspection should be carried out by a competent person on a regular basis to ensure user safety and product strength.
BEAL recommend as a minimum formal inspections every 3 months if in frequent use, annually for occasional use.
Any and all kinds of modification or repair are forbidden.
Never mask a deterioration under adhesive tape.
This product is personal equipment. During use outside your presence it could be subjected to serious and invisible damage.
In case of loaned use, the inspection controls must be doubled.


LIFETIME
Lifetime = Time of storage before first use + time in use.
Storage time : In ideal conditions this product may be kept for 5 years before first use without affecting its future lifetime duration in use.
Lifetime :
The potential lifetime of this product in use is 10 years.
Attention : This is only a potential lifetime. A Protector could be destroyed during its first use. It is the inspections which determine if the product must be scrapped more quickly. Proper storage between uses is essential. The lifetime of the sling in use must never exceed 10 years. The total maximum lifetime (storage before use + lifetime in use) is thus limited to 15 years.
The Protector must be scrapped without delay if:
- on inspection it appears to be damaged,
- it has been in contact with dangerous chemical products,
- if there is the slightest doubt about its security.


WARNING
This Protector is not PPE. It does not guarantee protection for ropes against all forms of impact, abrasion, excessive heat or chemical contamination.
Never use the Protector as a sole guard against excessive heat, impact, sharp edges, solvents and corrosive substances.
Never allow the Protector or its connector to interfere with the opening and closing of any device attached to the rope.
Never use the Protector as a lanyard protector.
Never allow moving ropes to come into contact with stationary ropes.
The various cases of incorrect use shown in this notice are not exhaustive, there are innumerable wrong uses possible, it is not feasible to show them all.
Activities at height are dangerous. They may lead to grave injury or death.
You are responsible for your own actions and decisions.
The clearance below the user must be sufficient to prevent the user from striking any obstacle in case of a fall.
This product must only be used by trained and competent personnel, or directly under the control of a competent person.
Any deviation from these rules brings risk of injury or death.
The use of this Protector for, or on, hire is strongly inadvisable.
Vous etes responsables de vos propres actions et decisions.

BEAL GUARANTEE
This product is guaranteed for 3 years against any faults in materials or manufacture. Exclusions from the guarantee: normal wear and tear, modifications or alterations, incorrect storage, poor maintenance, damage due to accidents, to negligence, or to improper or incorrect usage.

Responsibility
BEAL is not responsible for the consequences, direct, indirect or accidental, or any other type of damage befalling or resulting from the use of its products.