Αλυσίδα χημικής τοποθέτησης Raumer "Masterfix" με καραμπίνερ

RA-313

Αλυσίδα με αγκύρια χημικής τοποθέτησης "MASTERFIX" και καραμπίνερ ασφαλείας.

37,50 €

Επικοινωνήστε για διαθεσιμότητα

Περιγραφή

Particularly suitable for indoor environments as the Rock Bolt Hangers require a 12mm hole.

High-quality versatile Belay Station. Suitable for placement in any position – slab, roof, overhang etc.

The rope is inserted in two FIXED carabiners (Art.165) mounted opposite each other, preventing the rope from slipping out accidentally.

The dual carabiners also supply the maximum possible resistance to wear.

The anchor is usually bolted using a Hang Fix expansion bolt. We recommend using two screw anchors such as art. 144.

Placement Instructions:
-The placement surface must be completely solid with a crystalline structure.
-As well as visual evaluations, a good method is to strike the rock vigorously with a hammer.
-The sound produced should be dry and dull rather than hollow.
-Use an appropriate drill to create the hole in the rock, taking care to make it exactly perpendicular to the placement surface.
-Use a 12mm SDS PLUS drill bit (such as art.140) with a depth equating to the chosen anchor.
-A deeper hole has no ill-effect on the anchor (although naturally it wastes the drill's battery).
-Make sure that the bit is in good condition and that its diameter is exactly equal to the diameter of the anchor.
-Drill the second hole above and left or right of the first at an appropriate distance so as not to load the oblique ring, following the same procedure.
-Insert both screw anchors in the Rock hangers then insert these into the drilled holes using a hammer.
-Position the hangers to correspond with the directional force.
-Use a hex key 17 to complete the placement, turning the nuts with an appropriate level of torque.
-The belay station is now in place and ready for use.

IMPORTANT NOTE:
-From 2013 the material used in the majority of our anchors is now stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304.
-To highlight this change each article is stamped with the relevant symbols.

Art 313
RT: 27 KN
RA : 25 KN
D : 12 mm
W: 580 gr

Προδιαγραφές

Art 313

RT: 27 KN

RA : 25 KN

D : 12 mm

W: 580 gr