Βύσμα Raumer "Hang Fix" inox M12XL 12x120mm

RA-224

Όψεις:

Βύσμα "HANG FIX" από INOX M12XL 12x120mm.

7,22 €

Επικοινωνήστε για διαθεσιμότητα

Περιγραφή

Art. 224 - HANG FIX Stainless Steel M12XL - O12x120

Stainless steel AISI 316L bolt.

This is the most reliable and trustworthy of the stainless steel expansion bolts used in mountaineering and climbing.

Extra long type with two expanding collars (diam. M12x120 mm).

It requires hard compact rock (limestone, granite, dolomite) and is ideal on compact rock with an inconsistent and soft surface which has been "damaged” by the elements.

New type
The expanding collar is a new design and has greatly improved on the previous version.
The design phase focused on creating a technology which ensures expansion on an increased number of surfaces.
Our tests show that this objective has been achieved.

Attention: On particularly soft rocks (such as sandstone) all expansion bolts - including our own - are not recommended due to the unreliable nature of the supporting material.

In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.

Technical Specifications
The material used in the majority of our anchors is now stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304.
To highlight this change each article is stamped with the relevant symbols. However bolts have not been branded as once in place, the symbols would be invisible, so instead a small circular collar has been added (see photo above) to mark the difference between the two metals. This allows verification of the type of bolt used at any time.

Attention: There is also a "Marina” version of this anchor which is highly resistant to saline corrosion. To mark the difference between stainless steel AISI 316L and the marina version of the same material, all marine-suitable anchors have been marked with a fish symbol and the initials “INOX". Note: As mentioned above, this branding is not used on bolts. In order to differentiate the marine version, as well as the afore-mentioned collar there is a small engraved dimple which allows for accurate identification once the bolt is in place. (See photo above).
We recommend reading the attached PDF document for a detailed explanation of the problems presented by marine corrosion.

MARINA version: Art.224M

Reference
Extraction R = 30 Kn
Radial R = 28 Kn
Weight = 120 gr

Ποσότητα
Μέγεθος
Μέγεθος